Part & assembly
Part drawings, materials and interference; identify support, loading surfaces and final seating requirements.
Catalogue image · Configuration subject to proposal
Servo Press
C-frame Servo Press
Open access for loading and tooling adjustments in stand-alone assembly stations.
Configuration & selection
- Frame
- C-frame
- Installation
- Stand-alone station
- Process
- Configured to application
This page introduces the product family. Final specifications, features and scope are defined in the agreed technical proposal.
PRODUCT OVERVIEW
Product overview
The open C-frame provides front and side access for bearing, bushing and small-component assembly. Check throat depth, tool height, table size and operator clearance against the part geometry.
Set the force or position endpoint around the assembly criteria, with configured curve evaluation to identify deviations. Significant eccentric loads, simultaneous multiple pressing points or wide fixtures require a separate frame and guide review.
PRODUCT ENGINEERING
Design, process & configuration
View full image ⤢ENGINEERING DETAIL
Open access around the part
The open C-frame allows front and side access. For stand-alone bearing, bushing and small-component stations, check throat depth, tooling height, mounting holes and operator clearance. Assess eccentric loads, simultaneous multi-point pressing and wide tooling separately.
PROCESS SEQUENCE
- 01Locate
- 02Approach & contact
- 03Controlled insertion
- 04Evaluate & record
Illustrative sequence; validate targets, speed, time and evaluation criteria for the part.
View full image ⤢This Zhongcheng brochure image shows another C-frame benchtop arrangement. Use its appearance, panel and tooling layout for project discussion; final specifications, configuration and service terms follow the agreed contract.
Image source：Zhongcheng 2026 brochure · p.7 · original image
View full image ⤢The process-file screen manages parameters for different assembly tasks. Define control mode, speed, target and dwell step by step. At changeover, match the recipe version, tooling and actual part. Displayed values are manual examples only.
Original Chinese interface retained; the explanation below describes its purpose.
Third-party reference · Image source：YZJ-1000 PC manual · software 2.1.46.55 · p.12Define your configuration
Space & loads
Force, working stroke, daylight, table and eccentric loads; check tooling and loading clearance together.
Quality & data
Good and defective samples, evaluation rules, result or full-curve retention, barcodes and interfaces.
PROCESS GUIDE
Press control & quality evaluation
Specify control modes, force–position curves, OK/NG evaluation and traceability for your selected controller.
Read the guide ↗Related equipment
01
↗
↗Servo Press
Four-column Servo Press
A four-column guided platform for press fitting, forming and fixture integration.
02
↗
↗Servo Press
Benchtop Servo Press
A compact benchtop layout for small-part assembly and process trials with dedicated fixtures.
03
↗
↗Servo Hot Press
Four-column Benchtop Servo Hot Press
A four-column, three-platen structure with force/position feedback, PID heating and non-stick tooling for multi-point plastic heat staking and bonding.
LET’S TALKLet’s build your
Contact on WhatsApp Let’s build your
next pressing solution.
Tell us about your part, process and cycle requirements. Start with an engineering conversation.