Part & assembly
Part drawings, materials and interference; identify support, loading surfaces and final seating requirements.
Catalogue image · Configuration subject to proposal
Servo Press
Four-column Servo Press
A four-column guided platform for press fitting, forming and fixture integration.
Configuration & selection
- Frame
- Four-column
- Drive
- Electric servo
- Table & stroke
- Selected for the workpiece and tooling
This page introduces the product family. Final specifications, features and scope are defined in the agreed technical proposal.
PRODUCT OVERVIEW
Product overview
Four guided columns support a pressing station built around the workpiece and locating fixtures. Specify force, working stroke, daylight, table mounting and eccentric loads together.
A project can combine staged speeds, soft contact, force- or position-based endpoints, dwell and return. Confirm force–displacement plots, evaluation windows and traceability with the selected controller. A live curve display alone does not establish historical curve export.
The proposal should define tool interfaces, guarding, sensor range and trial acceptance conditions. See the technical guide for family-level selection ranges; these are not the rating of an individual machine.
PRODUCT ENGINEERING
Design, process & configuration
View full image ⤢ENGINEERING DETAIL
Guidance, tooling & the load path
Four columns guide the moving press head. Design part location, table support and tool attachment together, with particular attention to eccentric loading and wide fixtures. Supply assembly drawings, maximum part dimensions and the loading method.
PROCESS SEQUENCE
- 01Locate
- 02Approach & contact
- 03Controlled insertion
- 04Evaluate & record
Illustrative sequence; validate targets, speed, time and evaluation criteria for the part.
View full image ⤢The PC interface provides force–position, force–time and position–time views to inspect contact, insertion and dwell. These sample curves are not Zhongcheng accuracy measurements or customer acceptance records.
Original Chinese interface retained; the explanation below describes its purpose.
Third-party reference · Image source：YZJ-1000 PC manual · software 2.1.46.55 · p.23
View full image ⤢The PC manual illustrates evaluation conditions along a curve using multiple regions. Validate regions and limits against good parts, defects and boundary samples. The image does not establish this function as standard on every machine.
Original Chinese interface retained; the explanation below describes its purpose.
Third-party reference · Image source：YZJ-1000 PC manual · software 2.1.46.55 · p.16Define your configuration
Space & loads
Force, working stroke, daylight, table and eccentric loads; check tooling and loading clearance together.
Quality & data
Good and defective samples, evaluation rules, result or full-curve retention, barcodes and interfaces.
PROCESS GUIDE
Press control & quality evaluation
Specify control modes, force–position curves, OK/NG evaluation and traceability for your selected controller.
Read the guide ↗Related equipment
01
↗
↗Servo Press
C-frame Servo Press
Open access for loading and tooling adjustments in stand-alone assembly stations.
02
↗
↗Servo Press
Benchtop Servo Press
A compact benchtop layout for small-part assembly and process trials with dedicated fixtures.
03
↗
↗Servo Hot Press
Four-column Benchtop Servo Hot Press
A four-column, three-platen structure with force/position feedback, PID heating and non-stick tooling for multi-point plastic heat staking and bonding.
LET’S TALKLet’s build your
Contact on WhatsApp Let’s build your
next pressing solution.
Tell us about your part, process and cycle requirements. Start with an engineering conversation.